Orthopedic Spine Titanium Pedicle Screws, Spinal Screw Instruments

CanFIX Characteristics of The ProductsThe Spinal Fixation System consists of a variety of shapes and sizes of rods, hooks, screws, crosslink and connecting components etc., as well as implant components from CANWELL MEDICAL CO., LTD. The Spinal Fixation System, which can be rigidly locked into a variety of configurations, with e

Featured Products

CanFIX Characteristics of The Products
The Spinal Fixation System consists of a variety of shapes and sizes of rods, hooks, screws, crosslink and connecting components etc., as well as implant components from CANWELL MEDICAL CO., LTD. The Spinal Fixation System, which can be rigidly locked into a variety of configurations, with each construct being tailor-made for the individual case. Spinal Fixation System can be used with the Spinal Fixation System.
Product NameSurgical Instrument Set for Pedicle Screw spinal fixation system implant orthopedic
MaterialThe CanFIX are made of stainless steel
ColorCustomized
Standard ISO 13485,ISO9001,QSR820,CE
Contraindications1.Severe osteoporosis sufferer;
2.Sensitive sufferer on implant material known or under suspicion;
3.Sufferer under behaviour un-controlled;
4.Sufferer with metabolism and immunology dysfunction;
5.Spinal cord or nerve damnification;
6.Other sufferers not suitable for spinal inner operation according to clinical determination.
IndicationsThe device provides stabilization and immobilization of spinal segments as an adjunct to fusion in the treatment of the following acute and chronic instabilities or deformities:
(1)trauma (i.e. fracture or dislocation),
(2)curvatures (scoliosis, kyphosis, and/or lordosis),
(3)spinal tumor,
(4)failed previous fusion,
(5)pseudarthrosis,
(6)spinal stenosis. It is not intended for pedicle screw fixation above T8.
Precautions:1.The spinal fixation system has not been evaluated for safety and compatibility in the MR environment. It has not been tested for heating, migration, or image artifact in the MR environment. The safety of spinal fixation system in the MR environment is unknown. Scanning a patient who has this device may result in patient injury.
2.Inner implant shall be taken out in time after expiry or cure according to clinical examination.
3.The inner implant can not replace normal bone, the patient shall be told to conduct suitable recovery excises, but over load and acute movement is forbidden.
4.Do not use the inner implant with different materials or from different manufacturers together.
5.Rod of spinal fixation system can be transfigured if necessary, to obtain the shape similar with spinal column, but particular tools are necessary, and bending come-and-go is forbidden, otherwise will potentially cause breaking and invalid.
6.The operation doctor shall have abundant clinical experience, and familiar with inner fixation operation, inner implant and accessory devices.
  Orthopedic Spine Titanium Pedicle Screw, Spinal Screw Instrument
Orthopedic Spine Titanium Pedicle Screw, Spinal Screw Instrument
Orthopedic Spine Titanium Pedicle Screw, Spinal Screw Instrument

Instrument Set
NO.P.NDescriptionQty.
1212010001Awl Length 228mm1
2212010002Pedicle Probe, Ø3.0mm, straight1
3212010003Pedicle Probe, Ø3.5mm, straight1
4212010004Screw Tab Breaker1
5212010006Universal Screw Driver1
6212010007Rod Pusher1
7212010008Depth-limited Awl1
8212010009Feeler for Screw Channel, curved1
9212010010Quick Connect T-Handle2
10212010011Monoaxial Screwdriver1
11212010012Polyaxial Screwdriver1
12212010013Rod Rotation Wrench, hexagonal1
13212010014Rod Holder1
14212010015Rod Bender1
15212010016Parallel Compression Forceps1
16212010017Parallel Distractor Forceps1
17212010018Power Grip1
18212010019Compression Sleeve2
19212010020Counter Torque Wrench1
20212010021Pedicle Marker, right3
21212010022Pedicle Marker, left3
22212020004Plug Starter2
23212030022Feeler for Screw Channel, straight1
24212012000instrument tray1
25212013000Implant Tray1




Company Introduction>>
Mini Fragment 2.4mm Reconstruction Trauma Plate Orthopedic Surgical Implants
FAQ:

Q: Trading company or manufacturer?
A: We are manufacturer since 1994. Our location is in Jinhua, Zhejiang Province, East China. 
     2 hours by high-speed train from Shanghai.

Q: How's quality? Any Certificate? Regions of sales?
A: Our products are approved by CE/ISO13485.
     At present our main overseas markets are Asia, South America and Europe.

Q: Regional Distribution?
A: Yes we are looking for and welcome distribution. 
     Please contact us for discussion if you are interested to become our distributor.

Q: How long is delivery time?
A: Generally 7-15 days if stock available and 30-45 days if regular production needed.
    Depending on order quantity, product type, and other order factors and requirements.

Q: Samples available? Free or extra ?
A: We can accept sample order. With extra price.

Q: Terms of payment ?
A: T/T.

Q: Any OEM service?
A:  We can offer OEM service. Products can be made-to-order and with special requirements. 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours