Nail Supplies Femoral Interlocking Intramedullary Nails Orthopedic Implant
With the increasing of aging population and high-energy injury, occurrence rate of trochanter fracture is increasing. Some elderly patients who perform the traditional therapy will hardly recover, and also lying in bed for long time will result in trochanter varus and other complications. Therefore early surgery is considered the efficient way for reducing complications and improving life quality.
Young patients and patients with good bone condition can perform the early surgery, which is the efficient way to reduce complications such as femur necrosis, malunion and so on.
Currently, implants therapy performed for trochanter fracture has the problem of large wound, long operation time and much more complications.
CanPFN offers two kinds of proximal fixation, which can not only offer stable fixtation for elderly patients and osteoporosis patients, but also can offer dynamic fixation for young patients and patients with good bone condition.
|Product Name||Nail supplies Femoral interlocking intramedullary nails orthopedic implant|
|Material||The CanPFN are made of Titanium alloy.|
- Petrochanteric fractures(31-A1 and 31-A2)
- Intertrochanteric fractures(31-A3)
- High subtrochanteric fractures(32-A1)
Extended PFN(length 360mm-420mm)
- Low and extended subtrochanteric fractures
- Ipsilateral trochanteric fractures
- Combination fractures(in the proximal femoral)
- Pathological fractures
|Features and Benefits:||--Two functions achieved : anti-rotation and stable fixation|
--Two interlocking options:
a. Helical blade: fill interspace to reduce bone loss.
b. Lag screw: offer better compression locking effect
--Long nail tip and flutes design to prevent stress concentration
- Medial-lateral angle of 5°.
--Inner thread design on the end of the nail makes easier for nail extracting.
--End cap with different heights.
|Product design philosophy:||*Biomechanical stability fixation |
*Minimally invasive operation technology
Instruments for CanPFN
|Hexagonal Solid Screwdriver Length 248mm||1|
|Proximal Aiming Arm||1|
|Buttress Nut for Proximal Aiming Arm||2|
|Protection Sleeve for distal locking||2|
|Obturator for Distal Locking||2|
|Trocar for Distal Locking||1|
|Protection Sleeve for blade||1|
|Protection Sleeve for lag screw||1|
|Obturator for Blade||1|
|Obturator for Lag Screw||1|
|Protection Sleeve for lag screw||1|
|Aiming Arm for distal locking||1|
|Distal Aiming Connecting Shaft||1|
|Distal Targeting Device for Long Nail||1|
|Targeting Device Nut for Long Nail||1|
|Distal Outrigger Nut for Long Nail||1|
|U-shaped Stabilizing Spacer||1|
|Handle Connecting Nut||1|
|Universal Chunk with T-Handle||1|
|Ø5.2Protection Drill Sleeve||1|
|Temporary End Cap for the lag screw||1|
|Flat Drill with T-Handle||1|
|Quick Connection T-Handle||1|
|Ratchet Wrench for Nut, hexagonal||1|
|Guide Wire Ø3.2×400||5|
|Depth Gauge for Guide Wire Ø3.2||1|
|Cannulated Drill Bit for cortex boneØ10.6/Ø3.2||1|
|Cannulated Drill Bit with limitØ10.6/Ø3.2||1|
|Fixation Sleeve SW4.5/φ3.2||1|
|Screwdriver for PFN Blade||1|
|Extractor Connection shaft for blade||1|
|Counter-torque Wrench for blade||1|
|φ4.3 Drill Bitφ4.3/300mm||3|
|Pin Wrench SW3/SW5||1|
|Depth Gauge for Locking screw||1|
|Wrench with T-Handle||1|
|Extractor for Nail M8||1|
|Guide Wire with Hook φ2.8||1|
|Cannulated Screwdriver for end cap φ2.8/SW4/SW11||1|
|Cannulated Wrench for end cap SW11||1|
|Extractor for Blade SW4.5/φ3.2||1|
|Lag Screw Holding shaft||1|
|Wrench shaft for Lag Screw||1|
Q: Trading company or manufacturer?
A: We are manufacturer since 1994. Our location is in Jinhua, Zhejiang Province, East China.
2 hours by high-speed train from Shanghai.
Q: How's quality? Any Certificate? Regions of sales?
A: Our products are approved by CE/ISO13485.
At present our main overseas markets are Asia, South America and Europe.
Q: Regional Distribution?
A: Yes we are looking for and welcome distribution.
Please contact us for discussion if you are interested to become our distributor.
Q: How long is delivery time?
A: Generally 7-15 days if stock available and 30-45 days if regular production needed.
Depending on order quantity, product type, and other order factors and requirements.
Q: Samples available? Free or extra ?
A: We can accept sample order. With extra price.
Q: Terms of payment ?
Q: Any OEM service?
A: We can offer OEM service. Products can be made-to-order and with special requirements.